APPLIED Measurement can supply a wide of dedicated embedded/standalone data acquisition and PC-based control systems which can be complemented by signal analysis software.
Data Acquisition and Embedded Systems
• Compact Standalone/Embedded or DIN-Rail
• MS Windows embedded platform
• Autonomous and self-contain module
• Wide range of digital and analogue outputs (force, pressure, stress, temperature, frequency, acceleration, angle, distance, velocity, voltage, current)
• “Star” or “Daisy Chain” network via TCP/IP or CAN
• Built-in wheatstone bridge (full or half or quarter)
• Built-in amplifier for measuring devices (load cells, strain gauges, thermocouples)
• 24-Bit A/D converter
• 8x Digital inputs, 8x digital outputs, 4x analogue outputs
• 4x Counter inputs for capture of RPMs, displacements, etc
• Up to 512 field bus channels per experiment
• On board signal analysis
• Isolation for all I/O and COMMs
• GPS Option
• Removable flash disk (Up to 16GB)
• Internal UPS with alarms
• Remote access (GPRS/GSM) for data logging and setup
• WLAN capability (WiMax Option)
• Real-time applications of math operations (DSP), such as statistics, FFT, filters, class-counting, freely defined virtual channels
• Real-time deduction
• Up to IP67
• Flatpanel display option
• Export, display, processing of CAN-bus messages (measured data)
• Up to 8 CAN-nodes (depending on busDAQ model)
• Operating Temperature Range: -45° to +85° (condensation allowed)
• Initialisation of CAN-bus sensors
• Easy parameterisation via CAN-Bus Assistant
• Sending of alarm messages via CAN, TCP/IP and GPRS
• Logging of all events (messages) with time and date stamp
• Vector database linkage
• Supports smart sensors
• Auto signature for network devices and modules
• PC-based data acquisition and signal analysis software
• Third party drivers for popular SCADA and data acquisition software (including Labview)
PC-Based Control System
• PC-base systems
• MS Windows platform
• Tower/Desktop, panelmount or 19” rackmount
• PCI, PCI-Express and PCI-X Slots
• PXI, Compact-PCI formats
• Variety of on-board I/O with added option to Aadd extra I/O
• Support all Major COMMs, i.e. TCP/IP, RS232, RS485, CAN
• Isolation for all I/O and COMMs
• Front-end and back-end access for I/O
• Video capture and encoding
• Hard-drive and flash drive support
• Operating temperature range: 0° to +65°
• On-board Vventilation
• DC or AC power supply
• Standard connection for VGA interface (flatpanel display)
Signal Conditioner
• DIN-Rail and 3U 19” rackmount solution
• Signal conditioning/amplification for all sensors, transducers, devices, etc
• Output range from 0-10V, ±10V and 4-20mA
• Minimal interfacing customisation in PC, PLC, DCS and data loggers
• Back panel interfacing for Rackmount solution
• Up to 10 modules for 19” Rackmount
• LED and LCD indicator for 19” Rackmount Solution
• Peak/valley signal hold
• Analogue add/subtract
• Absolute value generator
• Frequency to voltage
• Alarm outputs
• Comparator
• Operating Ttemperature: 0 to 65°C
Signal Analysis Software
• Uniform software package with open system architecture
• Real-time/on-line displays for multi-channels
• Freely defined computation of results from the measurement channels
• Monitoring of any measurement channel with alarm / triggered response.
• Remote real-time access via CAN, GPRS etc
• Real-time calculations for open and closed loop control algorithms
• Integrated data browser
• Control commands for test process control and communication with other devices
• Event logger to record all functions
• 3D and 2D analysis
• Built-in curve manager (configure curve Windows)
• 1 and 2 dimensional histograms
• Class-counting
• Filter design
• Spectral analysis
• Quartz timed hardware interrupts with a resolution of 100uS
• An integrated PID controller with dynamically loadable parameters
• Video (picture data and measurement data synchronised)
• Synchronised display of measurement curves and video data
• Improved, intuitive mouse operation
• Enhanced CAN message treatment
• Simplified marker functions
• COM class library
• Built-in report generator
• Importing and exporting data to different formats
• Multi-page reports
• Order tracking analysis
• Verification of calibration data and monitoring of calibration intervals
• User-friendly sound output
• Compatible across all Window packages
• Plug ‘n’ Play sensor database
Applications
• Factory automation
• Automotive
• Mining equipment
• OEM use
• Level detection
• Construction equipment
• Road automation
• Robotics
• Harvest equipment
• Military
• Water and oil drilling rigs
• Building automation
• Railway
• Weighing systems
• Transportation